Reconditioned Mortara ELI 200 EKG Machine
This is a Reconditioned Mortara ELI 200 interpretive electrocardiograph from Mortara Instrument is a flexible and portable instrument that provides simultaneous 12-lead acquisition.
Features:
- with INTERPRETATION
- The printout, on 8.5" wide (215mm) paper, enables the presentation of 3, 4 or 6 channels of ECG in automatic mode and 3, 6 or 12 channels during rhythm recording.
- The ELI 200’s lead fail detection and signal quality check ensure optimal signal acquisition, reducing the need for ECG re-acquisition and thereby lowering operating expenses.
- The LCD presents the user friendly interface which prompts the user for commands and displays the unit’s status.
- The full alphanumeric keyboard increases staff efficiency by making patient data entry fast and simple.
- The optional internal modem provides the means to communicate with the E-Scribe/NT data management system or transmit to the Federal Aviation Administration.
- The ELI 200’s standard 40 ECG internal storage capacity can be expanded to 150 ECGs.
- The Serial Comparison software included with the expanded memory option automatically compares every new record (interpretive text and waveforms) with the last six ECGs of the same patient and significant changes are highlighted.
- 2 Year Warranty
|
ELI 200TM |
|
| Feature | Specifications |
| Instrument Type | 12-Lead Electrocardiograph |
| Input Channels | Simultaneous acquisition of all leads |
| Standard Leads Acquired | I,II,III,aVR, aVL,aVF, V1,V2,V3,V4,V5,V6 |
| Input Impedance | Meet or exceed the requirements of ANSI / AAMI EC11 |
| Input Dynamic Range | |
| Electrode Offset Tolerance | |
| Frequency Response | |
| Patient Leakage Current | Meet or exceed the requirements of ANSI / AAMI ES-1 |
| Chassis leakage current | |
| Digital Sampling Rate | 10,000 s/sec/channel
used for pacemaker spike
detection. 500 s/sec/channel used for recording and analysis |
| Special Functions | Baseline Filter, lead off and/or artifact detection, AC interference rejection |
| Recording Technique | Computer controlled thermal dot array (200 dots/inch) |
| Paper Type | Thermal sensitive, full
grid, 215mm x 75m |
| Thermal Writer Speeds | 5, 10, 25, 50 mm/s |
| Sensitivity | 5, 10, or 20 mm/mV |
| Device Classification | Type I, Class CF |
| Weight | 25 pounds (11.34 kg) |
| Dimensions | 14" x 17.25" x 4.75" (35 x 43.1 x 11.8cm) |
| Power Requirements | 100-240 VAC at 50 or 60 Hz, or internal batteries (more than 1,000 ECGs per battery charge) |


















SECURE ONLINE ORDERING